🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

Strap Clip with D-Ring (2 Pack)

Strap Clip with D-Ring (2 Pack)

Add shoulder straps and purse chains to your wallets and clutches so easily with these quality side clips. These are ready-made strap tabs, perfect for use with our 1/2" Swivel Snap Hooks and Purse chains. These look gorgeous, and are sturdy and so easy to use. Perfect for the Necessary Clutch Wallet! 

EACH PACKAGE CONTAINS BOTH 1 LEFT AND 1 RIGHT SIDE PIECE OF ONE FINISH ONLY. TOTAL OF 2 CLIPS. 

INSTALLATION: Easy to install, a small flat screw driver required. 2 Pieces plus 2 screws for each side clip. Slide on for fit. If the area is too thick, you can hammer lightly with a rubber mallet to compress. Start holes with an awl, and then screw in screws. Make sure you use a thread locking liquid or glue to secure screws, and glue to adhere metal pieces. 

Measurements:

  • Width at widest: 1/2" or 12 mm
  • Total Length including ring:  1 3/4" or 44 mm
  • Channel gap (width of opening): 3/16" or 4 mm 
  • The fabric must be able to compress to 3/16" (4 mm) for the clip to slide on.

Ethically manufactured in China

Select Finish
From $0.92

Original: $3.06

-70%
Strap Clip with D-Ring (2 Pack)

$3.06

$0.92
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11

Description

Add shoulder straps and purse chains to your wallets and clutches so easily with these quality side clips. These are ready-made strap tabs, perfect for use with our 1/2" Swivel Snap Hooks and Purse chains. These look gorgeous, and are sturdy and so easy to use. Perfect for the Necessary Clutch Wallet! 

EACH PACKAGE CONTAINS BOTH 1 LEFT AND 1 RIGHT SIDE PIECE OF ONE FINISH ONLY. TOTAL OF 2 CLIPS. 

INSTALLATION: Easy to install, a small flat screw driver required. 2 Pieces plus 2 screws for each side clip. Slide on for fit. If the area is too thick, you can hammer lightly with a rubber mallet to compress. Start holes with an awl, and then screw in screws. Make sure you use a thread locking liquid or glue to secure screws, and glue to adhere metal pieces. 

Measurements:

  • Width at widest: 1/2" or 12 mm
  • Total Length including ring:  1 3/4" or 44 mm
  • Channel gap (width of opening): 3/16" or 4 mm 
  • The fabric must be able to compress to 3/16" (4 mm) for the clip to slide on.

Ethically manufactured in China